Description
7000CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, 7000CYDUP4BNLS inner diameter is 10mm, 7000CYDUP4BNLS outer diameter is 26mm, 7000CYDUP4BNLS width is 8mm.
Item: 7000CYDUP4BNLS Angular Ball Bearing Type: Nachi Angular Ball Bearings Dimensions: 10mm x 26mm x 8mm/Metric Bearing Inner Diameter: 10mm Bearing Outer Diameter: 26mm Bearing Width: 8mm Size: 10 x 26 x 8 mm Cage: Polyamide resin cage Quality: ABEC-5 Basic Dynamic Load Cr (KN): 5.35 Made in Japan Quantity: One Bearing dDBrr110mm26mm8mm0.30.15Nachi Single Row Angular Contact BearingThe raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.7000CYDUP4BNLS Nachi Angular Contact Bearing 10x26x8:Abec-5:Japan
7000CYDUP4BNLS-Nachi-10x26x8
